Filter: All brands |
KAMEARI Ultra Plug Cords (Kameari Spec) | Check car compatibility | |
8mm low resistance plug cord set. |
Nagai Denshi ULTRA Blue Point Plug Wire | Check car compatibility | |
Ideal for extracting maximum performance from modern spark plugs (iridium etc). Silicone rubber covered cable, boots, and caps (cobalt blue colour), is excellent at withstanding voltage, and heat resistance. The copper core wire features excellent conductivity, and with the three layer structure of silicone core, glass braid (sheath) and silicone rubber cloth (like that featured in the conventional silicone series), these wires can withstand voltages of 150,000 V or more. Read more...Matched to modern spark plug characteristics, "Blue point power plug cords" are low resistance cords. Low uniform resistance value of 0.5 KΩ (Less than 1/2 of the conventional Ultra Silicone wires) for each cylinder. These wires also incorporate of line resistance technology (noise prevention device). With the low resistance value of 0.5 kΩ, the winding type noise suppressor (resistance) efficiently cuts noise by the effect of the L (inductance) component. Moreover, by adopting ultra unique proprietary noise suppressor at the end of the plug cord, a uniform resistance value is realized for each cylinder, and by adopting a low resistance value of 0.5 kΩ, the maximum spark energy is supplied without loss. The low resistance value of 0.5 kΩ per cylinder is best matched to plug with R (register) and iridium plugs. |
Nagai Denshi ULTRA Silicone Power Plug Wire | Check car compatibility | |
High conductivity copper core wires. Using winding fixed resistors developed for each type of vehicle, these wires extract, and supply the maximum, uniform spark energy for each cylinder regardless of the length of the cord. Read more...Winding resistance is set in the boot of both cord terminals, and noise is efficiently eliminated by the noise source. Ultra's original construction method combined with the copper core wire creates a wire with excellent tensile strength. The pure silicone rubber outer cover provides excellent weather resistance and can withstand high voltages, providing durability that often exceeds the life of the car. |
NGK Power Cables | Check car compatibility | |
Low resistance spark plug leads (0.9K ohm/m). |
Proshop Nakagawa MORE DRIVE L6 Plug Cord Set | Check car compatibility | |
Spark plug cord set that can be routed from the front of the head cover. |
Ralliart Sports Spark Plug Cable Kit | Check car compatibility | |
  |
SplitFire Twin Core Plug Cords | Check car compatibility | |
  |
SplitFire V Charger Plug Cords | Check car compatibility | |
  |
SPOON SPORTS High Tension Cord Set | Check car compatibility | |
  |
Suzuki Sport Racing Plug Cord (Power Ignition 900) | Check car compatibility | |
  |
TRD Spark Plug Cord Set | Check car compatibility | |
The spark plug cord must reliably transmit the high voltage from the ignition coil so that the spark plug can reliably send a spark across its gap. The TRD spark plug cord sets were developed based on the racing use concept - That is, achieve ideal resistance to enable a strong, steady spark, even under harsh conditions. Silicon rubber is used - with its excellent heat and water resistance characteristics. Red - to evoke the TRD image, which makes an even hotter looking engine. |